{"id":4664,"date":"2019-01-31T16:40:52","date_gmt":"2019-01-31T08:40:52","guid":{"rendered":"https:\/\/www.octalsteel.com\/?p=4664"},"modified":"2025-12-23T18:27:21","modified_gmt":"2025-12-23T10:27:21","slug":"api-5ct-specification","status":"publish","type":"post","link":"https:\/\/www.octalsteel.com\/api-5ct-specification\/","title":{"rendered":"API 5CT Casing and Tubing Specification"},"content":{"rendered":"

API 5CT is standard technical specifications for steel casing and tubing pipes used for oil wells in petroleum and natural gas industries.<\/p>\n

Besides casing and tubing, it also includes pup joints, coupling stock, coupling material, and accessory materials, and establishes requirements for three product specification levels (PSL-1, PSL-2, and PSL-3). The requirements for PSL-1 are the basis of this standard.<\/p>\n

This page summarizes how API 5CT casing and tubing<\/strong> are specified, including common grades, product specification levels (PSL), and standardized connection types. For product pages with size ranges and typical ends, refer to Steel Casing Pipe API 5CT<\/strong> and OCTG Tubing, API 5CT Tubing<\/strong>. For thread inspection and gauging references aligned with API connections, refer to API Coupling and Threads for Casing and Tubing<\/strong>.<\/p>\n

Common Grades<\/h4>\n

\u2022 J55\/K55
\u2022 N80\/N80Q\/L80
\u2022 C90
\u2022 R95\/T95
\u2022 P110\/C110
\u2022 Q125<\/p>\n

Connections<\/h4>\n

API 5CT applies to the following connections which comply with API SPEC 5B:
\u2022 SC:<\/strong> Short round thread casing
\u2022 LC:<\/strong> Long round thread casing
\u2022 BC:<\/strong> Buttress thread casing
\u2022 NU:<\/strong> Non-upset tubing
\u2022 EU:<\/strong> External upset tubing
\u2022 IJ:<\/strong> Integral tubing connections<\/p>\n

4 Groups of Grade<\/h4>\n

\u2022 Group 1: All casing and tubing in Grades H, J, K, N, and R
\u2022 Group 2: All casing and tubing in Grades C, L, M, and T
\u2022 Group 3: All casing and tubing in Grade P
\u2022 Group 4: All casing in Grade Q<\/p>\n

View more information for API Couplings and Connections<\/a>.<\/p>\n

Manufacture<\/h2>\n

General<\/h3>\n

According to the API 5CT standard, steel material used for making the pipe billet shall undergo grain refining treatment. This steel shall contain one or more grain refining elements, such as a certain amount of aluminum, niobium, vanadium, or titanium, so that the austenite grains of the steel Grain refinement.<\/p>\n

\u2022 Pipes supplied shall be manufactured in seamless type or EW type.
\u2022 Couplings, coupling stock, and coupling materials shall be seamless.
\u2022 Cold-drawn tubing pipe shall be properly heat treated; otherwise, it is not acceptable.
\u2022 Casing and tubing attachment materials shall be seamless pipes unless other types are stated on the order.<\/p>\n

Casing and Tubing is a kind of OCTG pipe<\/h4>\n

\"\"<\/a><\/p>\n

Heat Treatment<\/h3>\n

Heat treatment methods for API 5CT casing and tubing are a key factor to differ in each grade. Products requiring heat treatment shall be subjected to full-body and full-length heat treatment. The heat-treated upsetting product should be heat-treated in terms of its full body and full length after upsetting.<\/p>\n

A separately heat-treated coupling blank is acceptable. If the finishing temperature is higher than the upper critical temperature of the treated steel and the pipe is air-cooled, it shall be normalized.<\/p>\n

in the case of welding type, the weld seam shall be heat treated to a minimum temperature of 540 \u2103(1000\u00b0F), or a certain treatment method shall be used to make the no untempered martensite structure in the weld.<\/p>\n

N80 Type 1 and Type Q<\/h4>\n

Steel grade N80 type 1 products shall be normalized or normalized and tempered at the option of the manufacturer.
N80Q steel-grade products shall be quenched and tempered.<\/p>\n

R95<\/h4>\n

R95 steel grade shall be quenched and tempered.<\/p>\n

L80<\/h4>\n

When tempered at temperatures below 620 \u2103(1150\u00b0F), grade L80 grade 13 Cr may be embrittled.<\/p>\n

Straightening<\/h3>\n

R95<\/h4>\n

R95 casing and tubing shall not be stretched or expanded cold working after final tempering, except for cold working which is necessary for normal straightening and not more than 3% of compression cold working.<\/p>\n

M65 and L80<\/h4>\n

Steel grade M65 and L80 products shall not be cold worked after final heat treatment except for the cold working required for normal straightening.<\/p>\n

C90 and T95<\/h4>\n

C90 and T95 products can be cold-rotated straightened, but the pipe must be heated to a minimum temperature of 480 \u2103(1000\u00b0F) degrees for stress relief after straightening. Light gag straightening for steel grade C90 and T95 products is allowed if necessary.<\/p>\n

C110<\/h4>\n

If necessary, the product shall be cold-rotated straightened and subsequently stress-relieved at temperatures between 30\u2103to 55\u2103 (50\u00b0F to 100 \u00b0F) below the final specified tempering temperature, or hot-rotated straightened at temperatures not more than 165\u2103 (300\u00b0F) below the final specified tempering temperature. If necessary, it is allowed to do light gag straightening.<\/p>\n

Q125<\/h4>\n

Gag-press straightening or hot-rotating straightening can be performed for straightening, but the temperature at the end of the rotary straightening should not be less than 400 \u2103 (750\u00b0F) (unless a higher temperature minimum is specified on the order). If the hot rotary straightening method cannot be used, the product can also be cold-rotated straightened, but the stress relief must be performed at 510 \u2103 (950\u00b0F) after straightening. The product cannot be subjected to stress relief after cold rotary straightening only by agreement between the purchaser and the manufacturer.<\/p>\n

Chemical Composition in API 5CT Specification<\/h2>\n

The product shall comply with the requirements specified in the chemical composition table for the specified steel grade and type. For the C110 steel grade, the manufacturer shall report when the purchaser asks for the lowest and highest ratios of all elements intentionally added to each batch (regardless of the purpose of its addition).<\/p>\n

\"api<\/a><\/p>\n

Tensile Properties<\/h2>\n

The product shall meet the tensile performance requirements specified in this standard. The tensile properties of the upset casing and tubing (except for elongation) shall be consistent with the requirements of the pipe body. In case of any dispute, the properties of the upset area (except for the elongation) shall be determined by cutting the specimen from the upset.<\/p>\n

\"api<\/a><\/p>\n

Dimension, Masses, Pipe Ends, and Defects<\/h2>\n

\u2022 API 5CT Casing dimensions and weight chart<\/a>
\u2022 API 5CT Tubing dimensions and weight<\/a><\/p>\n

For field selection and take-off, dimensional references are often used together with application context. The API tubing and casing chart<\/strong> helps cross-check common tubing ODs against typical casing ODs and connections when the completion requires matched casing-tubing programs.<\/p>\n

Labels and Sizes<\/h3>\n

In the dimensional table of this standard, the pipe is named with the labels and sizes (outer diameter). The outer diameter of the external upset pipe refers to the outer diameter of the pipe body, not the outer diameter of the upset portion.<\/p>\n

Dimensions and Masses<\/h3>\n

The pipe shall be supplied by the sizes, wall thickness and tolerance masses specified in the order. Other plain end pipe sizes and wall thicknesses are available upon purchase and manufacturer agreement. Coupling stock, coupling materials, and accessory materials shall be supplied in the required size of the order or the size of the coupling material shall be as specified in the manufacturer’s internal requirements.<\/p>\n

The accuracy of all measuring equipment used for receiving or rejecting shall be verified at least once per operating shift, apart from threaded ring gauges, plug gauges, and weighing implements.<\/p>\n

According to the provisions of this standard, if a measuring device that is calibrated or verified is subject to abnormal or severe conditions sufficient to affect its accuracy, it should be re-calibrated or re-verified before further use.<\/p>\n

Outside diameter tolerances<\/h3>\n

The following tolerances apply to the outside diameter, D, of casing and tubing:
\"\"<\/a><\/p>\n

For upset integral tubing connection<\/h4>\n

The following tolerances apply to the outside diameter of the pipe body immediately behind the upset for approximately 127 mm (5.0 in) for sizes Label 1: 5-1\/2 and smaller, and a distance approximately equal to the outside diameter for sizes larger than Label 1: 5-1\/2. Measurements shall be made with calipers or snap gauges.<\/p>\n

\"\"<\/a><\/p>\n

Wall thickness<\/h4>\n

Tolerance for casing and tubing wall thickness is -12.5%.<\/p>\n

Products end<\/h3>\n

Flat-end pipe<\/h4>\n

Flat-end pipe is a pipe supplied with unmachined threads, and it may be, or not be upset, in whichever case, it shall comply with all requirements of a specific steel grade in this standard.<\/p>\n

Product with API Threads<\/h4>\n

Steel grade H40, J55, K55 or M65 casings are available in short or long threads. However, if the purchaser requests a long-threaded casing, it should be specified in the order.<\/p>\n

Rounded Nose<\/h4>\n

The “round” or “bullet-nose” type of pipe end may be provided by the manufacturer or specified by the purchaser to replace the conventional corner breaks on the threaded ends of external upset tubing. The improved end should be rounded so that the coating is applied and the inner and outer surfaces are rounded and smooth, without sharp corners, or burrs.<\/p>\n

Threading<\/h4>\n

Product threading, gauging practice, and thread inspection shall be in accordance with API Spec 5B. The product end shall not be hammered but may be slightly shaped to meet the requirements of thread machining. For steel grades of C90 and higher strength, such forming shall only be carried out with the consent of the purchaser.<\/p>\n

Workmanship of ends<\/h4>\n

All product ends shall be free of burrs on the inside and outside edges. And sandblasting shall be applied to both male and female threads of C110 steel grade.<\/p>\n

Defects<\/h3>\n

All pipes and fittings made of pipes shall not have the following defects:
a. Any quenching crack
b. Any arc burn
c. Any surface cracking defect that reduces the net effective wall thickness to less than 87.5% of the specified wall thickness can be confirmed.
d. When the non-destructive inspection is specified in this standard or on an order, any non-surface cracking defects on the outer surface having an area greater than 260 mm2 (0.41 in2) are detected.
e. Any non-surface cracking defect that reduces the effective wall thickness to less than 87.5% of the specified wall thickness can be confirmed within 1.6 mm (1\/16 in) of both sides of the weld.
f. Any internal upset structure on all upset products may have sharp corners or drastic change of sections that can cause the 90 \u00b0 hook type tool to hang up.
g. Any non-linear surface cracking defects on the inner surface of the externally threaded part of the sanitary tube with a depth greater than 10% of the specified wall thickness.<\/p>\n\n\n

Delivery from Octal<\/h3>\n\n\n\n
\n